Smartphones and laptops don't have enough juice to extract the best sound from high-end headphones and IEMs.
To get the best sound, you'll want a powerful desktop amplifier like the iFi Audio ZEN CAN Signature.
Everything you need is included with the iFi Audio ZEN CAN Signature:
The iFi ZEN CAN Signature builds upon everything great about the original ZEN CAN and takes it up a notch.
Advanced circuitry and audiophile-grade components ensure the ZEN CAN Signature delivers a high-resolution, low-noise sound with clarity and detail.
Standard headphone jacks in smartphones, laptops, or tablets output around 1.0V or around 30mW of power - not enough to get the best sound from your favorite audio gear.
The ZEN CAN Signature delivers up to 1,890mW (11V) @ 64ohms from its balanced output. That's 1.8W of power - more than enough to drive demanding headphones to their full potential.
Headphones require adequate power to produce high-quality sound at adequate listening volumes.
A powerful amplifier like the iFi Audio ZEN CAN Signature has enough power to unleash your headphones' full capabilities, yet it also has outstanding flexibility for powering sensitive IEMs.
Get up to 52x more power from the ZEN CAN Signature's balanced output and enjoy the high-resolution sound that iFi Audio is known for. Switch between six gain settings courtesy of PowerMatch and drive your IEMs without any hiss or noise.
Tweak the ZEN CAN Signature's sound presentation through two analog processing modes - XBass II and XSpace add energy and detail to your favorite beats and a life-like ambiance to your music's soundstage.
The iFi Audio ZEN CAN Signature supports a wide array of input and output options.
Connect your preferred audio source via the ZEN CAN Signature's stereo RCA, 3.5mm single-ended, or 4.4mm balanced inputs.
Listen to your headphones or IEMs through the 4.4mm balanced out or the 3.5mm/6.3mm single-ended connections and enjoy crystal clear sound.
Prefer speakers? Connect your active speakers using a 4.4mm to XLR adapter and enjoy high-resolution sound through your favorite bookshelf speakers.
The components used to build the iFi Audio ZEN CAN Signature were specifically chosen to maintain low noise and distortion levels and enhance the overall dynamic range for the cleanest sound possible.
ELNA Silmic II and OS-CON capacitors are known for their low noise and stable frequencies, while the iFi/AMR OV op-amps deliver some of the cleanest sound of any headphone amplifier.
To ensure all the components receive clean power, iFi Audio includes their low-noise iPower2 power supply, which boasts up to 10x quieter operation versus standard power supplies.
The result? Low noise floor and distortion for enhanced resolution, detail, and soundstage.
The iFi ZEN CAN Signature features fully balanced circuits and audio circuits for low-noise playback.
The fully discreet and balanced design ensures you hear your music the way it was intended by the artist or producer. No extra noise means you will get extra details and nuances in your music, elevating your listening experience.
iFi Audio used Panasonic OS-CON capacitors for the ZEN CAN Signature.
OS-CON caps offer low ESR for top-tier noise reduction, high dynamic range, and great reliability.
Populating the ZEN CAN Signature's circuit board are TDK's C0G Class 1 ceramic capacitors.
The TDK C0G capacitors offer outstanding frequency stability. Low levels of distortion mean you'll hear your music with utmost clarity and resolution.
The ZEN CAN Signature uses iFi's custom OV Series operational-amplifier.
The OV Series Op-amp guarantees low noise, low distortion, and high bandwidth to ensure the best sound reproduction.
Input Voltage
5V/2.5A
Output (RMS)
Balanced: >15.1V/385 mW (@ 600 Ohm) / >11.0V/1890 mW (@ 64 Ohm) / >6.2V/1200 mW (@ 32 Ohm)
Single-Ended: >7.6V/98mW (@ 600 Ohm) / >7.4V/870 mW (@ 64 Ohm) / >7.2V/1600 mW (@ 32 Ohm)
THD&N
<0.006% (@ 360 mW/2.4V 16
Ohm) / <0.005% (@ 100 mW/1.27V 16
Ohm)
SNR
Balanced: >121dBA (@ 15.2V )
Single-Ended: >120dBA (@ 7.6V )
Output
Balanced: 7.4V RMS
RCA: 3.8V RMS
3.5mm: 1.92V RMS
Gain
0dB, 6dB, 12dB and 18dB
Frequency Response
10Hz - 200kHz (-3dB)
Power consumption
No Signal ~5W
Max Signal ~12W
Dimensions
158 x 117 x 35 mm (6.2" x 4.6" x 1.4")
Weight
550 g (1.21 lbs)
Line Section
Outputs
BAL: 6.7V max. (variable)
UNBAL: 3.5V max. (variable)
Output Impedance
BAL: <200Ω
UNBAL: <100Ω
SNR
BAL: <110dB(A) @ 0dBFS
UNBAL: <110dB(A) @ 0dBFS
THD+N
BAL: <0.007% @ 0dBFS
UNBAL: <0.015% @ 0dBFS
Headphone Section
Outputs
BAL: 6.7V max. @ 600Ω
UNBAL: 3.5V max. @ 600Ω
Output Power
BAL: >1000mW @ 32Ω; >74mW @ 600Ω
UNBAL: >320mW @ 32Ω; >40mW @ 300Ω
Output Impedance
BAL: <1Ω
UNBAL: <1Ω
SNR
BAL: <116dB(A) @ 0dBFS
UNBAL: <115dB(A) @ 0dBFS
THD+N
<0.005% (1V @ 16Ω)
Shipping is FREE on all orders to customers within the USA.
We don't want to mess around with fine print and extra charges. We like things to be simple and easy.
Here's how shipping works around here:
While we fully stand by every product that we sell, we understand that sometimes you might change your mind or realize the product you ordered wasn't exactly what you were hoping for.
Here's a quick rundown of our return policy.
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at HiFiSoundGear.